Air-Source Heat Pump Types: Air-to-Water, Air-to-Air, Monobloc and Split
Published:

Air-to-water and air-to-air: the two main air-source families
Air-source heat pumps come in two families, and the one that suits you mostly depends on how your home spreads heat around today. Air-to-water systems heat water, which then feeds radiators, underfloor heating and a hot water cylinder. Air-to-air systems heat (and usually cool) the air in your rooms directly through indoor units, and they typically do not make hot water.
Both families work on the same basic principle. A refrigeration cycle collects heat from the outside air and concentrates it for use inside. The difference is what receives that heat: a water circuit or the room air itself. That choice shapes everything else, from the pipework in your walls to whether you can have a hot shower from the same system.
Air-to-water: heat delivered through water
An air-to-water heat pump is the natural counterpart to a boiler. It produces warm water for a wet central heating system, so it can feed radiators or underfloor heating, and it can also heat a hot water cylinder. If your home already has radiators and you want one system to cover both heating and hot water, this is the family to look at first.
The US Department of Energy also describes a related air-source option, the reverse cycle chiller, which generates hot and cold water rather than air and is compatible with radiant floor heating in heating mode. Whether a particular air-to-water model can also provide cooling depends on the product, so treat it as a question for the manufacturer or installer rather than an assumption.
Air-to-air: heat delivered straight into the room
An air-to-air heat pump moves heat from outside air into indoor air without a water circuit. It comes in a few forms:
- Mini split (ductless): one outdoor unit and one indoor unit, conditioning a single room or open-plan space. The Department of Energy notes that air-source heat pumps are available for homes without ducts through this ductless version, called a mini-split heat pump.
- Multi-split: one outdoor unit serving several indoor units in different rooms.
- Ducted: an outdoor unit linked to ductwork that distributes conditioned air around the home, similar to how a central air conditioner works. It makes most sense where ducts already exist.
Because these systems work with air, cooling in summer is a common feature. Hot water is the gap: you would normally need a separate way of heating it. The Department of Energy's overview of heat pumps covers the ducted, ductless and water-based options from a US perspective, which is useful background for the terminology.
The types side by side
| Type | What it heats | Hot water? | Cooling? | Typical home fit | Main installation implication |
|---|---|---|---|---|---|
| Air-to-water | Water for radiators, underfloor heating and a cylinder | Yes, via a cylinder | Only on some models; check | Homes with, or planning, a wet heating system | Needs water pipework and usually space for a cylinder |
| Mini split | Air in one room or zone | Typically no | Usually yes | Homes with no ducts or wet system, or one area to condition | Indoor unit on a wall in each served room |
| Multi-split | Air in several rooms | Typically no | Usually yes | Homes wanting several rooms conditioned from one outdoor unit | Several indoor units linked to one outdoor unit |
| Ducted air-to-air | Air distributed through ductwork | Typically no | Usually yes | Homes with existing ducts | Relies on suitable ductwork |
This table is a starting map, not a verdict. Whether a system suits a particular property depends on its insulation, layout and existing heating, and a qualified installer would need to assess that.
Monobloc vs split: what changes in the outdoor-to-indoor setup
Once you have decided that an air-to-water system looks right, you will meet a second label. Air-to-water heat pumps come in two configurations, and the difference is where the connection between outdoors and indoors happens.
A monobloc system has a single outdoor unit. That unit connects to the home by water pipes, so the heated water travels from outside to your heating circuit and cylinder.
A split system has an outdoor unit plus an indoor unit. The two are linked by refrigerant pipework rather than water pipes, and the indoor unit is the part that hands heat over to your home's water-based heating.
In plain terms, monobloc means one unit outside with water running in, while split means a unit outside and a unit inside with refrigerant running between them. Neither label changes what the system heats. Both are air-to-water and can serve radiators or underfloor heating. Either may also be configured for domestic hot water, subject to the model, cylinder and system design.
One point of confusion is worth clearing up. The word "split" also appears in "mini split" and "multi-split", but those are air-to-air systems with indoor units that heat air, not water. In an air-to-water quote, "split" refers to the outdoor and indoor unit arrangement described above.
Where this matters in practice is space and pipework: whether you have room for an indoor unit, and what kind of pipes run between outside and inside. When you compare quotes, ask which configuration is being proposed and why it suits your property. The fuller trade-offs between the two belong in a dedicated comparison, so this section stops at what the labels mean.
Which type fits your home best?
Start with what you already have, because existing heat distribution is the strongest clue. A home with water-filled radiators or underfloor heating is already set up to receive heated water. A home with no wet system, or one with ducts, points elsewhere. Then layer on hot water, cooling and space.
A simple shortlisting framework
Work through these questions in order and note which type keeps coming up:
- What distributes heat today? If you have radiators or underfloor heating from a boiler, air-to-water is a strong option to shortlist. If you have no wet system and no ducts, mini split or multi-split is worth shortlisting. If you have working ductwork, add ducted air-to-air.
- Do you want the heat pump to make hot water? If yes, air-to-water is the family designed to handle hot water, using a hot water cylinder. Air-to-air systems typically do not provide hot water, so you would plan separately for it.
- Do you want cooling? Air-to-air systems usually offer it. For air-to-water, ask whether a specific model supports cooling rather than assuming it.
- What space do you have? Air-to-water usually needs room indoors for a cylinder, and a split configuration adds an indoor unit. Air-to-air needs wall space for indoor units or space for ductwork. Check this against what each quote proposes.
- If air-to-water, which configuration? Monobloc or split is a follow-up question once the family is settled.
Worked examples
- A house with radiators and a boiler, wanting to replace the boiler: air-to-water, in monobloc or split form, is a likely shortlist because the radiators and a cylinder can be served by heated water.
- A home without ducts or radiators, such as one with electric heaters, that mainly wants comfort in a few rooms: a mini split or multi-split may fit, with cooling as a possible bonus. Hot water stays a separate question.
- A home with existing ducts from a forced air system: a ducted air-to-air system is worth discussing with an installer.
A note on backup heating
Heat pumps can supply less heat as outdoor temperatures drop, so some homes keep or add a second heat source. A source from the Center for Energy and Environment, written about Minnesota homes, describes a dual fuel setup, where the heat pump covers cooling and part or most of the heating before switching to a gas or propane system. It also describes an all-electric setup, where electric resistance heating tops up in very cold weather. In many cases the existing heating system can stay in place as the backup. That is US guidance for a cold climate, so treat it as an illustration of the hybrid idea, not as a rule for UK or Irish homes. Your installer should tell you what is feasible for your setup.
Test your shortlist. Suitability, running costs and savings depend on your property and the installation. The free Heating Finder comparison calculator takes your home size, age, insulation and current heating setup, applies consistent assumptions that you can see, and returns estimates of investment, operating cost, savings and payback. It takes about two minutes, needs no registration, and Heating Finder takes no installer commissions.
The calculator gives estimates, not quotes, so use the results to sharpen your questions before you speak to installers. If you want more depth on a specific choice, such as air-to-air versus air-to-water, wet-system requirements or monobloc versus split, the guides on Heating Finder go further than this overview.


