Heat Pump Unit Cost vs Installed Price: What Fills the Gap

Published:

Heat Pump Unit Cost vs Installed Price: What Fills the Gap

Unit price vs installed price

A heat pump's unit price is what the equipment costs on its own, sometimes with a few bundled components. The installed price is the cost of the whole job, from the first survey through to a commissioned system running in your home. They are different numbers answering different questions, and the gap between them is where most budgeting mistakes start.

It helps to picture what a heat pump system is made of. There is an outdoor unit, some indoor components, and something to carry the heat around the house, such as radiators or underfloor heating. An advertised unit price normally speaks only to the first of those. Getting the other parts in, connected, controlled and signed off is what an installed price pays for.

A low price you see online is only a useful number if you know what it covers. Treat an equipment-only figure as one line of a budget, not as the budget.

This matters for three practical reasons:

  • Ads and listings can look cheaper than they are. A supply-only price sits next to installed prices in search results, but the two are not measuring the same thing.
  • Quotes can differ for reasons that have nothing to do with value. One installer may include work that another leaves out, so a lower total may simply mean a shorter scope.
  • Calculator results need the right input. If you are comparing options, as in the Heating Finder calculator, the useful figure is the total cost to get a working system, not the price of the box.

Any figures you meet while researching are illustrative estimates, not binding quotes. The sources we reviewed for this guide are largely US-based, which is another reason to treat any headline number as context rather than a prediction for your home.

What usually sits between the two

The gap is not one hidden fee. It is a set of separate jobs and materials, and which ones apply depends on your property and on what is already in place. This section covers them at a high level; the parent heat pump costs overview is the place for fuller breakdowns.

Categories that can sit between a supply-only price and a finished installation include:

  • Installation labour. Local labour rates are one of the factors that vary the installed cost, and labour is a large part of what the unit price leaves out.
  • Survey and design. Someone has to assess the home and its heat needs before the system can be specified and priced properly.
  • Pipework. Connecting the outdoor unit to the indoor parts of the system takes pipe, fittings and time. In split-type systems, how close the indoor and outdoor equipment sit affects the length of the connecting lines and therefore the work involved.
  • Controls. Thermostats and control equipment may or may not be bundled with the unit.
  • Hot water cylinder. If the system is to provide hot water, a suitable cylinder may be needed, and it is often a separate line from the heat pump itself.
  • Radiators or other emitters. Some homes may need changes to how heat is delivered to rooms. Sizing and replacement are a topic of their own, so here the point is simply to check whether they are in or out of the figure.
  • Electrical work. Switching away from fossil fuel heating may require electrical upgrades, and one source notes that moving from a gas furnace to an all-electric heat pump can require panel upgrades. Ask whether any electrical work is in the price.
  • Commissioning, certification and paperwork. Setting the system up, testing it and handling the documentation are real jobs. Check whether they are included and who does them.

Why the gap is different for every home

Cost variation is wide even before you get to your own house. The sources we reviewed say heat pump costs vary widely based on system type, home size, location and available incentives. Home-specific factors add to that: access to loft or crawlspace areas, any structural work needed for an exterior unit, and the distance between indoor and outdoor equipment. System type matters too. A ground-source system needs a buried ground loop, which adds scope that an air-source system does not have.

The practical consequence is that a headline unit price rarely predicts the final bill. Two homes buying an identical unit can end up with quite different installed totals, because the work around the unit is not identical. For the same reason, an installed figure quoted for a neighbour's house is a loose guide at best for yours.

How to compare figures like for like

Before comparing any two prices, work out what kind of figure each one is. A quick test is to look at the wording around the number and ask the questions in the table below.

If the figure looks like thisIt is probablyAsk this
A price for "the unit", "the heat pump" or "from £/€..." on a product page, with no mention of a survey or fittingEquipment-only (supply-only)Does this include anything beyond the outdoor unit, such as controls or a cylinder?
A written quote that mentions a survey, fitting, commissioning and a named scope of worksInstalledWhich items are listed, and which are explicitly excluded?
A price described as "after grant", "net of grant" or "with the discount applied"Installed net of grantsWhat is the price before the grant, and who handles the paperwork?
A single round number with no breakdownUnclearCan you break this down into equipment, labour and extras?

If you cannot tell from the wording, do not assume. Ask in writing.

Inclusions and exclusions to confirm

Once you know what kind of figure you have, put two quotes side by side and check each line below. A "not included" answer is fine; an unknown one is what makes quotes incomparable.

  • Is a site survey and system design included?
  • Is installation labour included, and is it fixed or an estimate?
  • Is the connecting pipework covered?
  • Are controls included, or priced separately?
  • Is a hot water cylinder included, and is any existing one being reused?
  • Are radiators or other emitters included, changed or left as they are?
  • Is any electrical work included, such as a new circuit or consumer unit changes?
  • Are commissioning, certification and paperwork included?
  • Is VAT included or shown separately?
  • Are warranty terms and any maintenance requirements stated?

Two prices are comparable when they cover the same scope on the same property, with the same treatment of VAT and grants. If one quote includes a cylinder and new emitters and the other does not, the gap in totals tells you little. Ask the cheaper installer to price the missing items, or strip them out of the more expensive one, so the totals line up.

How grants can change the figure you see

Incentives can change which number is displayed. A grant can be deducted before a price is shown, shown as a separate line, or left out entirely, so a "net" price from one source and a "gross" price from another are not comparable until you put them on the same basis. Whether grants exist, how large they are and how they are applied differs by country and changes over time, so check the current rules for your country and your property with the relevant scheme or a qualified professional rather than relying on an article or an ad. Some sources we reviewed note US credits changing or expiring, which is a good reminder not to rely on older figures.

Once you have two figures on the same footing, the next question is what they mean for your own running costs and payback. That is where an independent tool is more useful than a headline price. The free Heating Finder calculator at heatingfinder.com lets you describe your home and compare heat pump options using visible assumptions, with no registration and no installer commissions. Use it to test the numbers, and treat the results as estimates that vary by property and installation, not as a quote.

Which heat pump suits your home?

Compare cost, savings, and expected payback using information about your home.

Start free calculation

Related guides